Woodpecker O-Light Max Curing Light Cordless Ergonomics Focused Light Upgraded 2500mW/cm2

Original Woodpecker Dental Cordless O-Light Max Curing Light Lamp 360 Degree Rotary 1 Sec Curing 2mm Reins. 2500mW/cm2 Light Intensity. Metal Head. Focused Light. 8-10mm Illumination Range. Wide Spectrum 385nm~515nm. Two Working Modes. Ergonomics Design. 1400mAh Rechargeable Lithium Battery. FDA Approved. One Year Warranty. 

Features

• FDA and CE0197 Certificated.
• Cure 2mm reins in one second, go quicker than ever.
• 360 degree rotary head, extend the possibility.
• Ergonomics design, optimize the hand-grip use.
• Wide spectrum, High light intensity, Focused light.
• It's a high tech dental equipment and has a perfect quality assurance system.
• Constant light intensity: The solidification effect is not affected by the consumption of remaining power.
• Large Capacity battery: A full charge can be used for more than 400 times continuously under 10s working time mode.
• Woodpecker rechargeable lithium battery had received CB certification. The batteries refuse explosion.

Technical Parameter

• Adapter input: AC 100~240V, 50Hz/60Hz
• Adapter output: DC 5V1A
• Battery: ICR 18490, 1400mAh 
• Wave length: 385nm~515nm (Wide Spectrum)
• Light intensity: 1000mW/cm2-2500mW/cm2
• Illumination range: Diameter 10mm
• Net weight: 0.6lb (259g)
• Dimension: 10.6"×1"×1.25" (268.8×26.1×31.8mm)
• Package: 1pc/box, 8boxes/ctn

Two Working Modes

• TURBO Mode: screen shows P1, Press the time button to select of time which could be 1s and 3s. Its output light intensity is about 2300 mW/cm2-2500 mW/cm2.
• NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5s,10s ,15s and 20s. Its output light intensity is about 1000 mW/cm2-1200 mW/cm2.

Packing List

• Main unit of the LED x1
• Light hood x1
• Adapter x1
• Bathymeter x1
• Pedestal charger x1
• Disposable sleeve x1
• Transparent cover x5
• Instruction manual x1
• Qualified certificate x1

Direction To Use

•  STEP 1: Switch on the LED Light Cure Unit with "Power Button".
•  STEP 2: Press the mode button to set the working mode, the corresponding indicator will on when a mode set.
•  Select the appropriate Time/Mode & start using the LED Light for curing.

Warranty